CCTV drainage surveys
Drain CCTV
A wheeled inspection camera inside a large drainage pipe.

CCTV drainage surveys

Commercial Drain Survey

Commercial drainage carries more flow, more connections and less tolerance for disruption than a single house. A survey needs to answer the question that prompted it, whether that is a repeated blockage, a flooding incident or a lease obligation.

What a commercial drain survey covers

A commercial drain survey examines accessible underground drainage serving business premises or a larger site. CCTV can investigate a pipe that repeatedly blocks, drainage affected by flooding or the condition of pipes beneath a warehouse, retail park or distribution centre. The footage provides a record of visible defects and obstructions.

The survey records what is visible inside the pipe. That includes joint condition, cracks, displaced sections, root ingress, scale, silt levels, obstructions and connections. It also records the line and depth of runs where these can be established, which is often as valuable as the defect list on a site with poor record drawings.

We can help with commercial CCTV drain surveys where the output needs to support a maintenance decision, a dilapidations discussion, an insurance claim or an acquisition. The report format can be agreed before the work starts.

Pipe inspection camera and drainage equipment beside a service van.

Why commercial sites need a different approach

Commercial sites can have long drainage runs, shared connections, separate foul and surface water systems, pump chambers, gullies and other drainage assets. The survey needs to cover the parts of the system relevant to the problem being investigated.

Survey timing may also need to work around production, trading hours, vehicle movements or periods of high flow. Access can be restricted by parked vehicles, loading activity or locked chambers.

The inspection may cover an individual defective pipe or a larger drainage network. Its extent depends on the drainage connected to the affected area and the available access points.

Triggers for commissioning a survey

Common reasons commercial clients ask for a drain survey include:

  • Repeated blockages on the same run, where clearing the pipe has not stopped the problem returning
  • Flooding inside a unit, yard or car park, where the cause is not obvious from the surface
  • Persistent odours that may point to a broken pipe, a lost connection or a defective trap
  • Lease end dilapidations, where the condition of drainage needs to be evidenced
  • Acquisitions and pre-purchase checks on a site with limited drainage records
  • Insurance claims following a collapse, subsidence or escape of water
  • Planned maintenance or relining work, where the pipe condition needs to be known before work is specified

For a dilapidations inspection, the relevant drainage may depend on the lease and the systems serving the premises. A recurring blockage may require CCTV and dye testing to establish connections. Before relining, the pipe must be examined for defects and conditions that could affect the proposed repair.

Access, permits and out of hours working

Commercial surveys often need to be planned around the site rather than the other way round. Chambers may sit under loading bays, in service yards or behind security gates. Some sites need permits to work, inductions, or a nominated escort. Where a site operates around the clock, survey work may need to be done out of hours to avoid disrupting trading or production.

Access requirements are worth confirming early. A chamber that cannot be lifted, or a run that cannot be reached without isolating flow, will change what can be surveyed and what the report can say. Where access is limited, the report should state the limitation rather than imply the whole network was seen.

Confined space entry is a separate matter. Under the Confined Spaces Regulations 1997, entry should be avoided where the work can reasonably be carried out from outside. Where entry is necessary, the work requires appropriate safe working and emergency arrangements. See the HSE guidance on confined spaces legislation.

Drainage channel set into a yellow resin factory floor.

What the survey can and cannot show

A CCTV survey shows the visible internal surface of the pipe as far as the camera can travel. It can identify cracks, fractures, displaced joints, deformation, roots, encrustation, silt and objects. It can show where a connection enters, and in many cases which direction it comes from.

It cannot see through heavy silt, scale or standing water. It cannot detect every defect, particularly those outside the pipe wall or behind a lining. A pipe that appears sound on camera may still have a defect that only shows under pressure testing or excavation. Where the camera cannot pass, the report should say so.

Defect coding depends on the specification agreed. Some surveys are coded to a recognised system such as MSCC5, and some are not. Not every survey is graded, and the report contents depend on what was asked for. If a particular coding or format is needed for a CAFM system or a contract, that should be confirmed before the survey is specified.

Reporting for facilities and estates teams

For multi-site estates, the report is often as important as the survey. A useful commercial report typically includes:

  • A plan or schematic showing surveyed runs and the direction of flow
  • Camera footage referenced to chainage or manhole-to-manhole sections
  • A defect schedule with location, description and severity where coding applies
  • Photographs of significant defects
  • Notes on access limitations and any runs not surveyed
  • A summary that links defects to the original question, such as the cause of a blockage

If the report needs to support a CAFM or asset management system, specify the required fields and format when requesting a quote. Whether that format can be provided should be confirmed before the survey is booked.

For sites with poor records, a survey is often paired with drain mapping so the pipe runs and connections are captured alongside condition. Where the question is about which pipe serves which building, drain dye testing can confirm connections that CCTV alone cannot.

From survey to planned work

CCTV findings may show that a pipe needs cleaning, root removal, local repair, relining or replacement. The appropriate work depends on the type and extent of damage, pipe condition and access. Some defects can be repaired locally, while severe displacement or collapse may require excavation.

Where relining is being considered, the survey needs to be detailed enough for a lining contractor to price and specify the work. See drain survey before relining for what that involves. Where the site has recurring problems across several buildings, a sector view may help, such as drain surveys for facilities management or drain surveys for industrial sites.

Where building regulations, public sewers or adoption requirements are relevant, the requirements for the site should be checked before work is specified. In England, see Approved Document H for statutory guidance on drainage and waste disposal.

What affects the cost of a commercial survey

Commercial survey pricing depends on the site, not a standard rate. The main drivers are the number and length of runs, the number of chambers, the access arrangements, whether out of hours working or permits are needed, the level of cleaning required before the camera can see, and the report format.

A short survey on one blocked run is a different job from a full network survey across a distribution centre. Prices depend on the number of runs, access and reporting needed, so describe the site and the problem rather than ask for a headline figure.

Free online tool

Build Over Agreement Checker

Building over or near public drains and sewers

Use the checker

Common questions

Frequently asked questions

Can a commercial drain survey be done outside trading hours?

Out-of-hours inspections may be possible where access and working arrangements permit. They can reduce interference with trading, vehicle movements or production, particularly when chambers are located in operational areas.

Will the survey find the cause of a repeated blockage?

It usually identifies what is visible in the pipe, such as roots, displaced joints, scale or a partial obstruction. It cannot see through heavy silt or standing water, so where the pipe is heavily silted, cleaning before the survey may be needed to get a clear view.

Can the report be formatted for our CAFM system?

If you need a particular format or specific CAFM fields, include those requirements when requesting a quote. The supplier can then confirm what report format and defect coding can be provided before the survey is booked.

Do we need a survey before relining a commercial drain?

A CCTV survey can identify internal defects, obstructions, changes in diameter and other conditions relevant to relining. The contractor may also need cleaning, access checks and further measurements before deciding whether lining is suitable and preparing a price.

Does a drain survey prove the drainage is legally compliant?

No. A survey records what is visible inside the pipe at the time of inspection. It does not by itself prove that the drainage system or site is legally compliant, and other checks may be needed.

Drain CCTV

Discuss your project with us

0330 350 3692

Request a quote

Complete the form and we will get back to you.

Request a quote